English
Español
Deutsch
日本語
Polska
中國
한국의
Українська
Italiano
Nederlands
Türkçe
Português
Bahasa Indonesia
Русский
हिंदीalign trex 500 x landing skate Modèles 3D en vedette
- Formats disponibles: Stereolithography: stl 723.32 kb
- Collection:No
- Prêt à imprimer:No
- 3D Balayage:No
- Contenu adulte:No
- PBR:No
- Vus:2329
- Date: 2021-05-05
- ID de produit:348176
- Rating:
print parameters:
infill 90-100.
support only compared to the printing platform
the file positioned as it was originally the best print position. to mount the skate it is enough to insert the landing tube on the smaller arc then insert the large arch, on each side. pay attention to the insert on the arch, it should be inserted with the part protruding on the landing tube landing pad. excellent project to create low-cost spare parts independently. the ideal material is the hard tpu. however you can also use low shrinkage abs.
if after purchasing the parts you find problems contact me i will help you thank you
massimiliano.conti.68@gmail.com Prêt à imprimer: Non
En savoir plusinfill 90-100.
support only compared to the printing platform
the file positioned as it was originally the best print position. to mount the skate it is enough to insert the landing tube on the smaller arc then insert the large arch, on each side. pay attention to the insert on the arch, it should be inserted with the part protruding on the landing tube landing pad. excellent project to create low-cost spare parts independently. the ideal material is the hard tpu. however you can also use low shrinkage abs.
if after purchasing the parts you find problems contact me i will help you thank you
massimiliano.conti.68@gmail.com Prêt à imprimer: Non
Avez besoin de plus de formats?
Si vous avea besoin d’\autre format veuillez ouvrir un billet d’\assistance et demandez le. Nous pouvons convertir les modèles de 3D en: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Nous ne convertissons pas les scènes 3D et des formats tels que .step, .iges, .stp, .sldprt.!
Si vous avea besoin d’\autre format veuillez ouvrir un billet d’\assistance et demandez le. Nous pouvons convertir les modèles de 3D en: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Nous ne convertissons pas les scènes 3D et des formats tels que .step, .iges, .stp, .sldprt.!
Télécharger align trex 500 x landing skate Modèles 3D en vedette stl De massimiliano.conti.68
align trex 500 landingAucun commentaires sur ce produit.
Produits liés De align trex 500 x landing skate
-20%
max bip max sat sldprt step stl stl x
Vetrock
Other
-10%
obj iges obj sat step stl x x stl
TechItemsRock
Other
$9.00
$10.00
png stl obj fbx dae blend 3ds
PolymathManiac
Other