italy pisa leaning tower of pisa
Modèle 3D

$49.00
italy pisa leaning tower of pisa Modèle 3D
$ 49.00
Supprimer! Signer ce produit
  • Animé:
    No
  • Textures:
  • Installé:
    No
  • Matériaux:
    No
  • Géométrie:
    Polygonal
  • Vus:
    4334
  • Date:
  • ID de produit:
    53060
  • Rating:
the leaning tower of pisa (italian: torre pendente di pisa) or simply the tower of pisa (torre di pisa) is the campanile, or freestanding bell tower, of the cathedral of the italian city of pisa. it is situated behind the cathedral and is the third oldest structure in pisa's cathedral square (piazza del duomo) after the cathedral and the baptistry.
the height of the tower is 55.86 m (183.27 ft) from the ground on the low side and 56.70 m (186.02 ft) on the high side. the width of the walls at the base is 4.09 m (13.42 ft) and at the top 2.48 m (8.14 ft). its weight is estimated at 14,500 metric tons (16,000 short tons). the tower has 296 or 294 steps; the seventh floor has two fewer steps on the north-facing staircase. prior to restoration work performed between 1990 and 2001, the tower leaned at an angle of 5.5 degrees,[1][2][3] but the tower now leans at about 3.99 degrees.[4] this means that the top of the tower is displaced horizontally 3.9 metres (12 ft 10 in) from where it would be if the structure were perfectly vertical.[5]
a popular tourist activity is to pose for photographs pretending to "hold up" the leaning tower and preventing it from falling.[6] the illusion is created through the principle of forced perspective.
Avez besoin de plus de formats?
Si vous avea besoin d’\autre format veuillez ouvrir un billet d’\assistance et demandez le. Nous pouvons convertir les modèles de 3D en: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Nous ne convertissons pas les scènes 3D et des formats tels que .step, .iges, .stp, .sldprt.!

Télécharger italy pisa leaning tower of pisa Modèle 3D 3ds c4d De sophia

italy pisa leaning tower of
Aucun commentaires sur ce produit.