Land rover discovery 5 printable Modèles 3D en vedette

3d model land rover discovery 5 facelift r-dynamic made in 1/8 scale can be printed on a 3d printer. the model has a salon and preparation for the installation of leds in the headlights. this is the body from my land rover discovery 5 facelift rc car model, chassis sold separately. can be used as 3d printed body for rc car or other purposes

body assembly video


full video of the model (body + chassis) this 3d model is only a body without chassis. chassis sold separately



detailed story of the development and creation of the model, test drive, etc. you can find out on my youtube channel

model dimensions:
width - 254 mm,
width with mirrors - 292 mm,
height - 253 mm,
length - 620 mm,
wheelbase - 367 mm

the model has possibility to install light module - drl lights, low beam, high beam, fog lights, turn signals, brake lights, a reverse indicator and engine sound module. these dimensions are the same dimensions as the original land rover discovery 5 in 1/8 scale. in order not to disturb the proportions of the body and make the model more replica, i use the given wheelbase and width dimensions, and not the standard 313mm for trophies rc cars.

bonus - wheel 3d models and file for printing stickers