English
Español
Deutsch
日本語
Polska
中國
한국의
Українська
Italiano
Nederlands
Türkçe
Português
Bahasa Indonesia
Русский
हिंदीLowPoly-BT361 Bas-poly Modèle 3D
- Formats disponibles: Autodesk FBX: fbx 10.52 MB
- Polygones:62,490
- Sommets:37,448
- Animé:No
- Textures:
- Installé:No
- Matériaux:
- Bas-poly:
- Collection:No
- cartographie UVW:No
- Plugins Utilisé:No
- Prêt à imprimer:No
- 3D Balayage:No
- Contenu adulte:No
- PBR:No
- Géométrie:Polygonal
- UVs non enveloppés:Unknown
- Vus:1596
- Date: 2022-04-26
- ID de produit:395553
- Rating:
there is a blend format
The BT361A-01 machine, which was built according to an unusual scheme, was distinguished by a characteristic layout. It was based on two medium-sized tracked trolleys. The crew cabin and engine compartment were fixed on the body of the front trolley. They were shifted forward, as a result of which the engine compartment casing protruded noticeably forward relative to the chassis. Behind the cab, near the center of the front trolley, there was a support with a hinge for installing a cargo platform. Its second support was placed in the center of the rear trolley. The rear trolley was similar in design to the front one, but differed in the composition of the units. The trolleys were connected to each other using a simple joint assembly. Prêt à imprimer: Non
En savoir plusThe BT361A-01 machine, which was built according to an unusual scheme, was distinguished by a characteristic layout. It was based on two medium-sized tracked trolleys. The crew cabin and engine compartment were fixed on the body of the front trolley. They were shifted forward, as a result of which the engine compartment casing protruded noticeably forward relative to the chassis. Behind the cab, near the center of the front trolley, there was a support with a hinge for installing a cargo platform. Its second support was placed in the center of the rear trolley. The rear trolley was similar in design to the front one, but differed in the composition of the units. The trolleys were connected to each other using a simple joint assembly. Prêt à imprimer: Non
Avez besoin de plus de formats?
Si vous avea besoin d’\autre format veuillez ouvrir un billet d’\assistance et demandez le. Nous pouvons convertir les modèles de 3D en: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Nous ne convertissons pas les scènes 3D et des formats tels que .step, .iges, .stp, .sldprt.!
Si vous avea besoin d’\autre format veuillez ouvrir un billet d’\assistance et demandez le. Nous pouvons convertir les modèles de 3D en: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Nous ne convertissons pas les scènes 3D et des formats tels que .step, .iges, .stp, .sldprt.!
