English
Español
Deutsch
日本語
Polska
中國
한국의
Українська
Italiano
Nederlands
Türkçe
Português
Bahasa Indonesia
Русский
हिंदीwoman body for vase mode Modèles 3D en vedette
Le contenu que vous êtes sur le point de visionner peut contenir du matériel uniquement adapté aux adultes. Pour continuer, vous devez confirmer que vous avez au moins 18 ans
Oui, j'ai au moins 18 ans
- Formats disponibles: Stereolithography: stl 16.61 MB
- Collection:No
- Prêt à imprimer:
- 3D Balayage:No
- Contenu adulte:
- PBR:No
- Vus:4610
- Date: 2021-03-15
- ID de produit:341135
- Rating:
highly optimised version to be printed easily and faster in vase mode!
recommended settings with 0.4 mm nozzle:
optimisations:
head cut at a greater angle for better overhang
slightly lower shoulders for better overhang
reduced pit above the clavicle
adding venetian dimples
most proportioned body
increased definition between the legs and the buttocks
fixed the hole between legs
3d printing settings
cura: special modes -> spiralize outer contour
s3d: layer -> single outline (vase mode)
slic3r: print setting -> spiral vase
no support!
50% size ( 30 minute):
layer height: = 0.10 - 0.11 mm
line width/extrusion width: 0.55*
speed: 30 mm/sec or slower! (20 mm/sec wall)
minimum layer time: 3s
temperature: +5c
fan: 75%**
100% size (90 minute):
layer height: 0.12 - 0.13 mm
line width/extrusion width: 0.65*
speed: 40 mm/sec or slower! (25 mm/sec wall)
minimum layer time: 6s
temperature: +10 c°
fan: 75%**
200% size (230 minute):
layer height: 0.16 - 0.17 mm
line width/extrusion width: 0.8*
speed: 50 mm/sec or slower! (30 mm/sec wall)
minimum layer time: 10s
temperature: +15 c°
fan: 75%**
*yes, it is possible to change the width of the line, up to 0.8 mm even with a nozzle from 0.4 mm
**only for pla and for better interlayer adhesion, but if the overhang are wrong, increased to 100 as well. (petg 100%, abs 0%)
En savoir plusrecommended settings with 0.4 mm nozzle:
optimisations:
head cut at a greater angle for better overhang
slightly lower shoulders for better overhang
reduced pit above the clavicle
adding venetian dimples
most proportioned body
increased definition between the legs and the buttocks
fixed the hole between legs
3d printing settings
cura: special modes -> spiralize outer contour
s3d: layer -> single outline (vase mode)
slic3r: print setting -> spiral vase
no support!
50% size ( 30 minute):
layer height: = 0.10 - 0.11 mm
line width/extrusion width: 0.55*
speed: 30 mm/sec or slower! (20 mm/sec wall)
minimum layer time: 3s
temperature: +5c
fan: 75%**
100% size (90 minute):
layer height: 0.12 - 0.13 mm
line width/extrusion width: 0.65*
speed: 40 mm/sec or slower! (25 mm/sec wall)
minimum layer time: 6s
temperature: +10 c°
fan: 75%**
200% size (230 minute):
layer height: 0.16 - 0.17 mm
line width/extrusion width: 0.8*
speed: 50 mm/sec or slower! (30 mm/sec wall)
minimum layer time: 10s
temperature: +15 c°
fan: 75%**
*yes, it is possible to change the width of the line, up to 0.8 mm even with a nozzle from 0.4 mm
**only for pla and for better interlayer adhesion, but if the overhang are wrong, increased to 100 as well. (petg 100%, abs 0%)
Avez besoin de plus de formats?
Si vous avea besoin d’\autre format veuillez ouvrir un billet d’\assistance et demandez le. Nous pouvons convertir les modèles de 3D en: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Nous ne convertissons pas les scènes 3D et des formats tels que .step, .iges, .stp, .sldprt.!
Si vous avea besoin d’\autre format veuillez ouvrir un billet d’\assistance et demandez le. Nous pouvons convertir les modèles de 3D en: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Nous ne convertissons pas les scènes 3D et des formats tels que .step, .iges, .stp, .sldprt.!
Télécharger woman body for vase mode Modèles 3D en vedette stl De 3dinium
art body female figure girl human sculpture sexy vase woman spiral breast vasemode spiralize singleoutline spiralvase tits buttsAucun commentaires sur ce produit.
